Yes, the output can be automatically activated when the input power is restored.
To enable this function, follow these steps:
1) Press the CONFIG key five times.
2) Select CF45 with the VOLTAGE knob.
3) Set CF45 to ForC (Output on) with the CURRENT knob.
To enable automatic output, the AC-FAIL protection must be canceled.
To cancel it, follow these steps:
1) Press the CONFIG key three times.
2) Set CF20 to Auto with the CURRENT knob.
Even in the event of a short interruption, PWR-01 series will automatically turn the output on without triggering an ALM (alarm).
Please note that each setting change takes effect after turning the POWER switch off and on again.
For the details, read the user’s manual – chapter of Basic Features – CONFIG Settings – CF20 and CF45.
