PWR-01 Series
よくあるご質問 閲覧ランキング
- 耐電圧(耐圧)試験って何ですか?
- 直流電源を接続する配電盤のブレーカ選定について教えてください。
- 検査票、試験成績書、校正証明書、トレーサビリティ証明書について教えてください。
- 電波法の高周波利用設備に該当する製品はありますか。
- VISAライブラリについて教えてください。
- ウォームアップ時間はどれくらいですか。
- 製品に電安法適用表示(PSEマーク)がありません。違法ではないですか。
- 耐電圧試験器を操作するために、必要な資格はありますか。
- PWR-01シリーズのPOWER スイッチをオンにしても動作しません。どうしたら良いでしょうか。
- 製品におけるPCB含有の有無について教えてください。
- マニュアル通りにコマンドを送っているのですが動作しません。どうしたらよいでしょうか。
- What is the output voltage rise time of PWR-01 series?
- What is the input voltage range for PWR-01 series?
- What is the difference between PWR-01 series and PWR series?
- Are the status outputs on the J2 connector of PWR-01 series isolated?
- Why does PWR-01 series not deliver its rated current at its rated voltage?
- What is the setting accuracy of the voltage monitor (VMON) in PWR-01 series?
- Why does the SET key light up on PWR-01 series when I turn the VOLTAGE or CURRENT knob?
- What do “setting” and “rating” mean in terms of voltage and current setting accuracy as described in the PWR-01 series specifications?
- Can PWR-01 series operate to limit the current when the load resistance decreases and the current increases during constant voltage (CV) operation?
- How much heat is dissipated from PWR-01 series?
- Are the front-panel and rear-panel output terminals available on PWR-01 series?
- What is the setting accuracy of the output voltage and current on PWR-01 series?
- Is it possible to set the voltage of multiple PWR-01 series units simultaneously via the RS232C interface?
- Does PWR-01 series have a GPIB interface option?
- Does PWR-01 series come with a load cable for the front-panel output terminals?
- Does PWR-01 series come with a load cable?
- Can PWR-01 series power cord be used in Europe?
- What is the internal resistance for the external voltage control terminal (for the output voltage) at the J1 connector of PWR-01 series?
- What is the internal resistance for the external voltage control terminal (for the output current) at the J1 connector of PWR-01 series?
- How do I choose the load cables and relay terminal block to perform parallel operation on PWR-01 series?
- How do I create and execute sequences in PWR-01 series?
- Does PWR-01 series come with a power cord?
- Can I purchase the J1 connector for PWR-01 series?
- Can I purchase a safety plug for the front-panel output terminals of PWR-01 series?
- Is there an option to convert the J1 and J2 connectors of PWR-01 series to the J1 connector of PAS series for analog control?






