It is recommended to use the shutdown control function through the external contact.
Use the J1 connector pin 11 and 12 on the rear panel to be able to turn off the output or turn off the POWER switch.
The release voltage across pins 11 and 12 is approx. 5 V maximum, and the short circuit current is approx. 500 μA maximum.
If the pin 11 and 12 are short-circuited, the output turns off or the POWER switch turns off.
To turn off the POWER switch, go to CF27 of the CONFIG setting.
If CF27 is set to OFF, the POWER switch doesn’t turn off.
If CF27 is set to ON, the POWER switch turns off.
