| Item | BIM1030 / BIM1100 |
|---|
| Trigger Function | | Select external trigger (EXTERNAL) or internal trigger (INTERNAL). |
|---|
| Trigger delay | | 0 to 9.999 s, OFF |
|---|
| Accuracy | ± 0.2 ms |
|---|
| Average function | The average count can be set between 2 and 99. OFF setting available. |
|---|
| Memory function | Saves up to 100 sets of measurement conditions. |
|---|
| key lock | Locks the key operation. |
|---|
| Zero adjustment | | Zero adjustment of the voltmeter and resistance meter. OFF setting available. Zero point clear function available. |
|---|
| Adjustment range | 1000 digit |
|---|
| Measurement logging and collective transfer function | Records up to 500 sets of measurement logs. Logs can be read collectively. |
|---|
| EOM function | | Outputs an EOM signal from the SIGNAL I/O connector when a measurement is completed. |
|---|
| HOLD | When the trigger source is set to INTERNAL, the signal is turned on after a measurement is completed until the next measurement starts. When the trigger source is set to EXTERNAL, the signal is turned on after a measurement is completed until the next trigger is detected. |
|---|
| PULSE | | Outputs a pulse when a measurement is completed. Pulse width: 1 ms to 99 ms |
|---|
| Accuracy | ± 0.2 ms |
|---|
